Detailed Product Description

1. Pillow Block consist of the insert ball bearing and house, the inster bearing is the deep groove ball bearings with wide inner rings, it insert in housing work as an unit bearings. The housing are mainly casting or pressed steel. The bearing unit are compact in design with perfect sealing devices, they can align with easy during operation and can be conveniently mounted or dismounted.  When mounted in appropriate housings to form housed bearing units, they are able to compensate for initial errors of alignment.
 
2. Housed bearing units are used in agricultural machinery, construction equipment, conveyor systems, textile machines and fans as well as in machines for food and beverage processing and packaging.
 
3. Mounted bearing units do not permit axial displacement and are therefore unsuitable for non-locating bearing arrangements. The distance between bearing positions should thus be short, or the units should be attached to resilient sheet metal fabrications to prevent them from being subjected to excessive stressing, for example, as a result of thermal elongation of the shaft.

4. Bearing Number
UCP:  This is the most basic unIt with a choice of hexagonal set screw or eccentric self locking collar for easy shaft mounting.  Dynamically and 3-dimensionally designed and developed housing can withstand load from all directions for normal duty service in all types of power transmission and general machinery.
1) UCP201, UCP202, UCP203, UCP204, UCP205, UCP206, UCP207,
UCP208, UCP209, UCP210, UCP211, UCP212, UCP213, UCP214
UCP215, UCP216, UCP217, UCP218, UCP305, UCP306, UCP307, UCP308, UCP309, UCP310, UCP311, UCP312, UCP313, UCP314, UCP315, UCP316, UCP317, UCP318, UCP319

UCF:  The square housing shape is appropriate for mounting on sides of machinery or for vertical mounting. It is designed to carry the load uniformly on four mounting bolts.  It is the most widely used flange shape. Like the pillow style unit, it can reduce operating cost
2) UCF201, UCF202, UCF203, UCF204, UCF205, UCF206, UCF207,
UCF208, UCF209, UCF210, UCF211, UCF212, UCF213, UCF214,
UCF215, UCF216, UCF217, UCF218, UCF305, UCF306, UCF307, UCF308, UCF309, UCF310, UCF311, UCF312, UCF313, UCF314, UCF315, UCF316, UCF317, UCF318, UCF319

UCFL:  Two hexagonal set screws on the inner or an eccentric self locking collar is used to secure the shaft to the bearing. The oval shaped housing is mounted with two mouting bolte. The mounting area and the total weight is reduced when com-pare to the square flange unit. The two mounting bolt hole pit-ch on the flange is equivalent to the diagonal monuting bolt hole pitch of the square flange for convenient interchange-ability.
3) UCFL201, UCFL202, UCFL203, UCFL204, UCFL205, UCFL206,
UCFL207, UCFL208, UCFL209, UCFL210, UCFL211, UCFL212,
UCFL213, UCFL214, UCFL215, UCFL216, UCFL217, UCFL218, UCFL305, UCFL306, UCFL307, UCFL308, UCFL309, UCFL310,
UCFL311, UCFL312, UCFL313, UCFL314, UCFL315, UCFL316,
UCFL317, UCFL318, UCFL319

UCFC:  Hexagonal set screw or eccentric self locking collar is used to secure the shaft. This unit can be accurately mounted by alig-ning the pilot lip on the mounting side of the flange with the assembly hole of the mounting surface. The best product for use in a rotating drums or in cases where eccentric alignment through hole is possible
4) UCFC201, UCFC202, UCFC203, UCFC204, UCFC205, UCFC206,
UCFC207, UCFC208, UCFC209, UCFC210, UCFC211, UCFC212,
UCFC213, UCFC214, UCFC215, UCFC216, UCFC217, UCFC218

5) UCC201, UCC202, UCC203, UCC204, UCC205, UCC206, UCC207,
UCC208, UCC209, UCC210, UCC211, UCC212, UCC213

6) UCPA201, UCPA202, UCPA203, UCPA204, UCPA205, UCPA206,
UCPA207, UCPA208, UCPA209, UCPA210, UCPA211, UCPA212,
UCPA213